Q1. What are the available sizes of protection sleeves?
A    1 mm and 4 mm
B    10 mm and 20 mm
C    30 mm and 50 mm
D    40mm and 60 mm

Q2. Which of the following equipment is not installed at user premises in a multi play service network?
A    Set Top Box
B    Optical Network Unit (ONU)
C    Optical Line Terminal (OLT)
D    Wifi Router

Q3. Which protective gear should be used to protect the eyes during splicing?
A    Safety Shoes
B    Safety Glass or Laser Goggles
C    Safety Harness
D    Respirator

Q4. Which tool is used to strip off the cable jacket?
A    Cable sheath stripper
B    Fiber Stripper
C    Round Cutter
D    Cleaver

Q5. In what equipment should the spliced fiber be placed?
A    Inside Splitter
B    Exposed over the ground
C    In the Splice Tray
D    In the water

Q6. For 40mm sleeve, end of stripped fiber coating should be placed at ____ marking on cleaver.
A    20 mm
B    15 mm
C    25 mm
D    40 mm

Q7. For ____ sleeve, end of stripped fiber coating should be placed at 20mm marking on cleaver.
A    20 mm
B    40 mm
C    50 mm
D    60 mm

Q8. What is the use of Heater Unit in fusion splicing machine?
A    It is used to heat the protection sleeve with splice
B    It is used to heat the fiber for better splicing
C    It is used to heat the cable for easy stripping
D    It is used to remove water particles from fiber

Q9. Which of the following component of multi play service network is used to connect ONU with TV?
A    Splitter
B    Set Top Box
C    Home Termination Box
D    Joint Closure

Q10. You want to strip the 250um coating down to the glass fiber without nicks or scratches. Which hole of the tri hole fiber stripper should you use?
A    First
B    Second
C    Third
D    First and Second Both